Maintenance

Maintenance and Cleaning Guide

Regular Maintenance
To ensure optimal performance and longevity of your Shower Tray with Heat Exchanger, we recommend the following regular maintenance steps:

Weekly Cleaning:

Remove any visible hair and debris from the drain area.
Wipe down the surface of the shower tray with a non-abrasive cleaner to prevent soap scum buildup.

Monthly Deep Cleaning:

Carefully lift the lid covering the heat exchanger.
Clean the perimeter space and the heat exchanger surfaces with warm water and mild detergent.
Use a soft brush to remove any stubborn debris.
Rinse thoroughly and replace the lid securely.

Preventing Clogs
To minimize the risk of clogging, consider the following tips:

Hair Catcher: Use a hair catcher in the drain area to trap hair and prevent it from entering the drainage system.
Regular Inspection: Inspect the drain and heat exchanger area regularly for any signs of buildup or blockage.

Troubleshooting
If you experience slow drainage or clogging, follow these steps:

  1. Remove the lid carrefully:
  2. Check the drain for any visible blockages and remove them.
  3. Clean the heat exchanger surfaces as described above.
  4. Use Drain Cleaner

If necessary, use a drain cleaner suitable for use with stainless steel and other materials used in the shower tray.

Contact Support:

If the issue persists, contact our customer support team for assistance.

Please note that the provided information is specific to the WWHRS shower tray and its technical specifications. Ensure to follow the manufacturer’s guidelines and instructions for accurate and proper installation.

Scroll to Top